JUS standardizacija

stossspannungsprufungen von Transformatoren und Drosselspulen (VDE-Richtlinie). — S 35 DK 621.314.21

DIN 57700 T 239 Juli 1984 Sicherheit elektrischer Gerate fur den Hausgebrauch und Mhnliche Zwecke Fenster- und Wandreinigungsgerate (VDE-Bestimmung). — S 5

DK 64.06—83:621

DIN 65220 Juli 1984 Luft- und Raumfahrt Anniet-Mutternleisten mit selbstsichernden Muttern mit MJ-Gewinde Mutternteilung vorgegebsn oder wahlweise: Leiste aus Aluminium Klasse: 1100 MPa/1200C. — S 4

DK 621.882.3—-034.15

DIN 65238 Juli 1984 Luft- und Raumfahrt Annietmuttern mit MJ-Gewinde mit zylindrischer Aussenkung, selbstsichernd, nicht beweglich, Eck-Flansch aus Stahl Klasse: 1100 MPa/235"% C. —S3

DK 621.882.3—034.15

BS 509:Part 2:1984

Acetone for industrial use. — Part 2. Methods of test. s4 UDC 661.727.4

BS 669:Part 1:1984 Flexible hoses, end fittings and sockets for gas burning appliances. — Part 1. Specification for strip-wound flexible hoses, covers, and fittings and sockets for domestic appliances burning 1st and 2nd family gases. — p 23 UDC 621.643.3.02

BS 673:1984

ISO 1180—1983

Shanks for pneumatic tools and fitting dimensions of chuck bushings. — p 12

UDC 621.542—229

BS 684:Section 2.44:1984

ISO 6464—1983

Methods of analysis of Fats and fatty oils. — Part 2. Other methods Section 2.44 Determination of gallates. — p 3 UDC 665.1.014:543

BS 1042:Section 2.3:1984

ISO 7194—1983

Measurement of fluid flow in closed conduits. — Part 2. Velocity area methods. — Section 2.3 Methods of flow measurement in swirling or asymmetric flow conditions

Standardizacija 1984./br. 9—10

in circular ducts by means of current-meters of Pitot static tubes. — p 24 UDC 532:542

BS 1902:Section 3.6:1984

Methods of testing Refractory materials. — Part 3. General and textural properties. — Section 3.6 Determination of grain density (methods 1902—306). — p 8

UDC 666.76.017:531

BS 1902:Section 4.5:1984 Methods of testing Refractory materials. — Part 4. Properties measured under an applied stres. — Section 4.5 Determination of modulus ofrupture at elevated temperatures (method 1902—405). —– p4

UDC 666.76.017

BS 1902:Section 5.13:1984

Methods of testing Refractory materials. — Part 5. Refractory and thermal properties. — Section 5.13 Determination of resistance to attack by slag (method 1902—513). —p5

UDC 666.76.017

BS 1970:1984 Specification for Rubber hot water bottles. — p 3 UDC 634.191

BS 3454:1984

Specification for 1.9/3.3kV,300 A bolted flameproof cable couplers and adaptors (including 380/660 V and 640/1100 V, 300 A adaptors), primarily for use in mines.— p 21

UDC 622.005

BS 3531: Part 15:1984

Surgical implants. — Part 15. Specification for devices for the fixation of the ends of the femur in adults. — p 13 UDC 615.461:616.71

BS 3606:1984

Spedifičation for 3.8/6.6 kV, 300 A bolted flamerroof cable couplers and adaptors, primarily for use in mines. — p 20

UDC 622.005:621.315

BS 4325:Part 9:1984

ISO 5502—1983

Method for Analysis of oilseed residues. — Part 9. Preparation of test samples. — p 3

UDC 633.85:665.3

297